GRUN DRUM PUMPS - STAINLESS STEEL
SL-SS - for inflammable and weak aggressive liquidsFor transfilling and draining of drums and containers.
The perfect drum pump for the most thin liquids.
Version A for high flow rate
Version R for high pressure with foot valve for complete drainage.
Recommendation inflammable liquids: SL-SS-R with the powerful motor Ex700 for your best safety.
SL-MP-Niro - mixing drum pump
For stirring of emulsions, dispersions, suspensions, etc. before starting the transfilling action. The mixing drum pump is fitted with mixing apertures. By moving a sliding sleeve with a lever, these holes can be opened or closed.
Open - is for mixing inside the drum
Closed - is for pumping out of the drum.
All this can be achieved with one unit.
Recommendation: SL-MP-SS-R with the powerful motor p400-A for best mixing result (motor Ex700 for inflammable liquids).
SL-Niro-S - for fluids of medium viscosity
The feed screw (S) is dedicated for liquids of medium viscosity (∇> 200 mPas), if the impeller types A and R reach their limitations.
With induction motor ideal combination for gentle dealing with the liquid.
pd500-1 0,37 KW 230 V: 500-0042
pd500-3 0,37 KW 400 V: 500-0039
Ex-proof motors on demand.
Recommendation: Induction motor with frequency inverter for variable flow rate.
Stainless Steel Tube Drum Pump key features:
- Cleaning the pumping unit is greatly facilitated; the risk of fluid carry-over when moving the pump to a different container is minimized.
- No bearings in the wave channel.
- Motor power is transferred by proven, robust coupling (1) with curved teeth over the stainless steel coupling element (2) with a large double bearing.
- Of course, the sealless pump tubes are fully compatible with the sealed models, allowing you to use the pumping units with any motor from grün product range.
- Depending on the application you can select one of 3 different types of impellers: axial (A), radial (R) and feed screw (S).
|
|
