SCHMITT VERTICAL CANTILEVER PUMP - TE RANGE
In the TE Pump Series, the motor power is transmitted vertically to the pump impeller through an extended shaft. This rotating shaft is exclusively supported through the two motor bearings and therefore runs completely contact free and abrasion-free inside the housing. Due to the construction design, the use of bearing and shaft seals can be forfeited.All parts that are in contact with the medium are made solid of stainless steel (1.4581).
Materials of construction: Supporting pipe and shaft made of 1.4571 (A4), Impeller and housing made of stainless steel fine cast 1.4581 (A4) and Housing gasket made of PTFE.
TE Series main features:
- Application at high temperatures up to +150° C
- Absolutely dry run safe (no contact of mechanical parts)
- The highest chemical resistance
- Robust, thick-walled design, made of only two materials (no thin-walled deep-drawing sheet metal)
- Long-lasting and abrasion-free
- Design for the operation under demanding conditions
- Open impeller (i.e. solids up to 3 mm grain size and 10 Vol. % possible)
- No abrasion into the medium to be pumped (high purity applications)
- Easy to maintain
- Universally applicable, quiet and compact
- Available for standardized immersion depths
|
|
